Solid wood countertops are all-natural items made of timber from trees about 120 years old. Timber is a living product and also the even more moisture receives, the more the timber kitchen counter will certainly increase. The timber we utilized in solid wood worktops has been previously kiln dried out to a moisture degree of 6%, as well as it is as a result crucial that the worktop is not subjected to a regularly high level of humidity. Normally the moisture degree in kitchen areas is approximately 50-70%.
The strong timber top need to be connected to the cabinet box making use of just wood screws and also washing machines. It is not recommended at all to adhesive the top on the cupboard box; the leading as well as the box broaden as well as acquire at various prices, for that reason cracks may eventually show up, most likely on the cupboards' surface.
The proper means of setting up a strong wood top is making use of steel dealings with along the cabinet box (see our website).
The metal correctings should be consistently dispersed throughout the size of the top, spaced at a 1' - 1.5' range from each other. Across the width, the top is typically taken care of to each steel assistance with 3 screws, one in the middle, one towards the front edge as well as one towards the rear edge. The supports have to be perfectly leveled; otherwise stress can create in the wood, resulting in bending, cupping, or splits.
We advise pre-drilling the screw holes into the wood counter top, in order to stay clear of cracks and splits. For the exact same factor, it is an excellent suggestion not to over tighten the screws. The finishing will considerably decrease the degree of such motions, however will certainly not remove them entirely. Because of the panel's laminated framework, the lengthwise motions are irrelevant, so the installer must focus on the activities happening throughout the panel's width. In order to avoid the development of inner stress, the openings in the metal mendings ought to be elongated towards the movements (see our website ).
When subjected to typical humidity degrees - i.e. 50-60% - the worktop's size will increase by 1/12"-1/ 24", yet live edge cutting boards when subjected to a level of 80-90%, this dimension may expand by up to 1/2" or also a lot more for some species. Therefore, when the back edge of the counter top is mounted versus a wall, the wall surface may restrict the top's all-natural movements, bring about unwanted stress in the wood. To avoid this, you can permit a 1/4"-1/ 2" joint between the wall and also the countertop edge as well as caulk it with a thin quote of acid-free silicone.
Furthermore, you can securely take care of the rear edge to the steel supports below and also hence, permit the all-natural motions to happen at the cost of the opposite edge.
In this instance, the openings in the metal mendings corresponding to the rear side will certainly be no larger than the screws diameter, while the openings matching to the center area as well as the front side will be elongated.
For extra details relating to the installment of timber kitchen counters, bar tops as well as kitchen islands, please visit our website.